600KW equals 805 HP if I did the math right and at 5,000 PSI that would require 276 GPM of flow which would produce over 34,132 BTU/Min. of heat. At lower pressure flow would increase but heat would remain constant.

I recently priced some pumps that would give that type flow with servo control and in quantities of 4 were $45,000.00 ea. Actually overkill for your project but real flexible as far as operating parameters.

The pump in your pictures appears to be a fixed volume Tyrone aluminum Gear pump. I'm not up on their offering so I can't say if they make a pump as large as you need. Almost any hydraulic pump you find would need some hefty gear reduction since most will not go above 2,000-2,400 RPM due to their Inlet line size not being able to get enough flow to keep it from cavitating..

You need to talk with a salesman from a local Fluid Power distributor or find a retired salesman that would help you for compensation. At present I am not able to doo any extra work.Self-priming pumps

2011-05-30

Back